GEAR DRIVE CAM KITS FOR TWIN CAM 2007/LATER & 2006 DYNA MODELS
WEIGHT: 3.03- REDUCED MAINTENANCE (NO PLASTIC CHAIN GUIDES OR TENSION SHOES TO WEAR AND CONTAMINATE ENGINE OIL OR CLOG OIL PASSAGES)
- CAM TIMING REMAINS CONSTANT; ALL DRIVE AND CAM GEARS UTILIZE A LIGHT PRESS FIT (GEAR LASH) THUS ELIMINATING ANY CHAIN STRETCH
- BEARING LOADS ARE REDUCED; NO CHAIN TENSIONERS ARE USED WHICH CAN ROB HORSEPOWER
- CRITICAL SPROCKET ALIGNMENT IS UNNECESSARY
- TO EASE INSTALLATION AND ELIMINATE THE NEED TO REMOVE THE FUEL TANK AND ROCKER COVERS , USE OUR ADJUSTABLE PUSHRODS FOUND IN THE ENGINE SECTION
- INCLUDES INSTRUCTIONS
ANDREWS 55HG CAM KIT
TIMING(*): 22/46 & 52/20
DURATION @ .053: 248 & 252
DURATION @ .020: 283 & 292
VALVE LIFT: .550 & .550
LIFT @ TDC: .197 & .181
STOCK SPRINGS
APPLICATION: GREAT CAM FOR 95 TO 103 ENGINES WITH 9.8 TO 10.2 COMPRESSION RATIO. MAX HORSEPOWER TO TORQUE AT MID AND UPPER RPM'S (2600-6200 RPM)
BY: ANDREWS PRODUCTS INC