Unit includes inner and outer springs chrome front and rear legs inside rockers for a 3/8 axle and internal brake wheel with all studs and bushings spring rods with bushings. For use with a 7/8 neck. Top clamp neck races and cone nut are not included. Some assembly may be required. 1 tubes on rear legs are tapped 3/4 -16 to accept threaded riser bushing set with this installed the builder can use a triple tree without ears and choice of post riser set. The 45 rockers are mounted in board of the fork legs and accept a 3/8 diameter axle. The distance between the rockers measure 6.5 . These forks are replicas of the stock units with electric welded and brazed construction and will accept all original style components and accessories for the detailed replica look. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. *NOTE: We measure from the top of the rear leg (tube) to the front axle center line.
FITMENT
1936 / 1952 WL
TECH NOTES
Unit is unpolished at the rear fork stem cross plate and at the front spring fork rod forging.
*NOTE: 45inch Spring Fork rockers are mounted to the inside of the fork and utilize a 3/8inch axle. 45inch Servi-Cars 1947-1957 use Big Twin rockers on the outside of the fork.
How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits to the axle position. This is the effective length as it is the legnth
from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame
height. This Spring Fork assembly accepts a 3/4inch axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1inch stem utilized tapered bearings for
ease of installation.
MEASURMENTS
Neck Stem: 7/8 inches
Legnth: 18 inches
ACCESSORY ITEMS
52-0758
49-0062
52-0757
44-0453
REPLACEMENT PARTS
49-0235
13-1937
7706-2
Tech Notes
Unit is unpolished at the rear fork stem cross plate and at
